Arlan-1453G-4E1

Arlan®-1453G-4E1 is designed to convert the data stream from the TDM port into IP packets or MPLS frames for transmission over a packet-switched networks.



Features of equipment:

  • Transmission of up to 4 E1 streams over IP-based networks;
  • Point-to-point and point-to-multipoint connection;
  • Compensation of variations in transport delay: up to 512 ms;
  • Corresponds to the IETF PWE3 RFCs for SAToP, CESoPSN, TDMoIP;
  • Independent timing recovery units provide recovery of frequency and the output of frame sync for each TDM port ;
  • VLAN support according to the 802.1Q recommendations , Multiprotocol Encapsulation Supports IPv4, IPv6, UDP, RTP, L2TPv3, MPLS and Metro Ethernet;
  • Setting of a code into the E1 line (HDB3 or AMI);
  • Control over local and remote devices;
  • 5 years warranty.

Management / monitoring of equipment are performed by: CLI, Telnet, SNMP v1/v2/v3.

Equipment interfaces meet the following settings: ITU-T References Y.1413, Y.1414 (Clause 10), Y.1453, Y.1452, G.823 & G.824; MFA Forum Implementation Agreements 4.1, 5.1, and 8.0.0; Metro Ethernet Forum Implementation Agreement MEF 8; IETF PWE3 Internet RFCs and Drafts for CESoPSN, SAToP, TDMoIP.

To install the unit into a standard rack (box), there is a special mounting for 19''rack.
To access the documentation, register or login.
Login:
Password:
Forgot your password?
More images
Arlan-1453G-4E1 Arlan-1453G-4E1
Яндекс.Метрика