PolyKom-200U+

Multiservice terminal optic modem PolyKom-200U + is designed for simultaneous transmission of:

  • up to 4 streams E1;
  • Fast Ethernet traffic or Gigabit Ethernet (optional).
Via one (WDM), or two Fiber Optic Cables (FOC).
Transmission speed of the optical channel is 1.3 Gbps.



Features of equipment:

  • license opening of E1 and Ethernet ports;
  • Jumbo Frames support;
  • event log in non-volatile memory that stores the date, time and nature of the event;
  • replacement units (SFP) , the use in the networks built on CWDM technology;
  • downloading of a new software from a personal computer;
  • display of the current status of single indicators;
  • low power consumption (less than 6 watts).
  • 5 years warranty.

Equipment control is performed:

  • On the F joint with use of any standard ANSI - terminal;
  • On the Q interface (Ethernet 10/100BASE-T) of SNMP v.1.0 protocol using any SNMP manager, Telnet.

Multiservice terminal optic multiplexer PolyKom ®-200U + provides comprehensive management capabilities via PC:

  • control over local and remote equipment in real time;
  • reconfiguration of local and remote devices (including loopbacks);
  • revision of logs of the events at the local and the remote equipment.

Interfaces equipment meets the standards of ITU-T G.823, G.747, G.704, G.703, G.651, G.652, G.654. ​​
Possible variants of optical interface:

  • 1310 nm single-mode fiber;
  • 1550 nm single-mode fiber;
  • bidirectional transceiver 1310 / 1550 nm (WDM) for the organization of work in fiber mode.
  • SFP module
Interface E1 (G.703)
Number to 4
Jack RJ45
Speed ​​ 2048 x (1 ± 50 x 10 -6 ) Kbit / c
Line code HDB3
Impedance symmetric 120 ohms
Damping up to 12 dB

Interface Ethernet 10/100/1000BASE-T 
Number 1
Jack RJ45
Rate of 100 or 1,000 Mbps (depending on version)
Maximum frame size 9,600 bytes

Optical Interface
Jack SFP / SC
Speed ​​ 1.3 Gb / s.
General characteristics - depend on the type used by the module or SFP optical transceiver installed SC (embodiment)

Management Interface «F»
Jack RJ45
Rate of 115 200 kbit / s

Management
F interface/RS-232 CLI
Q interface/100BASE-T protocols SNMPv1, Telnet

Power
Voltage

DC 36 - 72
Ability to connect external adapter ACA48 / 2 to 220

Power up to 6 W

Embodiment
Execution Desktop, can be installed in a 1U, 19''
H x W x D 35 x 140 x 120 mm
Weight 0.3 kg

Environment
Temperature from 5 to 40 ° C
Relative Humidity from 5 to 80%
Atmospheric pressure not less than 60 kPa
To access the documentation, register or login.
Login:
Password:
Forgot your password?
More images
PolyKom-200U+ PolyKom-200U+ PolyKom-200U+
Яндекс.Метрика